The booster pump unit
PU300A
pump unit / boost pump unit
- Product Summary
- Boost the pure water with low water pressure and supply it to the equipment
- Use
- Various cleaning apparatus,
a dicer spindle motor cooling,
deburring etc.
specification
-
Model
PU300A
-
pump
Cascade stainless pump
400W -
The discharge flow rate
13L/min/16L/min 50/60Hz
0.5 MPa at the time -
Applicable fluid
Pure water
-
display
Discharge pressure gauge 0 ~ 0.6 MPa
discharge pressure regulating valve (relief type) -
Remote function
Pump operation / stop command DC24V
-
Safe operation
・External-discharge operation during internal circulation automatic switching relief operation pressure 0.5MPa by the relief valve
・circulation water temperature rise detector operating temperature 50 ° C.
・overcurrent and earth leakage protection breaker actuation -
Power supply
AC200V ±10% 3Φ
50/60Hz 1.2kVA -
External dimensions
W228*H336*D520
-
Housing
Stainless steel hairline finish
-
weight
About 25kg
-
usage environment
Room, temperature 10 ~ 35 ° C.br> humidity 30-80%
(External site IPROS)
PU201A
pump unit / boost pump unit
- Product Summary
- Boost the pure water with low water pressure and supply it to the equipment
- Use
- Various cleaning apparatus,
a dicer spindle motor cooling,
deburring etc.
specification
-
Model
PU201A
-
pump
Cascade stainless pump
200W -
The discharge flow rate
17L/min/9L/min 50/60Hz
4Kgf / ㎠ at the time -
Applicable fluid
Pure water
-
Remote function
Pump operation / stop command DC24V
-
Safe operation
・External-discharge operation when the relief valve internal circulation automatic switching relief operation pressure 5 Kgf / ㎠ by
・circulation water temperature rise detector operating temperature 50 ° C.
・overcurrent and earth leakage protection breaker actuation -
Power supply
AC100V ±10% 50/60Hz 8A
-
External dimensions
W210*H245*D390
-
Housing
Ivory baking finish
-
weight
About 15kg
(External site IPROS)
UPPU-10LR
pump unit / boost pump unit
- Product Summary
- It boosts the ultra pure water and supplies it to the outside, and boosting is carried out by an air driven bellows pump, which has an air regulator for adjusting the pressure and a discharge pressure monitor
- Use
- Wafer spin cleaning
specification
-
Model
UPPU-10LR
-
Discharge pressure
0.4MPa max
-
The discharge flow rate
17L/min
0.2 MPa at the time -
Driving air pressure
0.2～0.4MPa
-
Air consumption
50L/min
-
Pulsation prevention
Accumulator built
-
Wetted piping material
Teflon PFA or PTFE
-
Water leak detection
Wire-type leak detector built
(External site IPROS)