Heating apparatus and cooling apparatus
thermoelectric cooling plate
Warm air drying unit
heater temperature control unit
PFA Flange heater
Dry solvent supplying unit C27A
Electronic cooling plate
control temperature and fluid / heating device and cooling device
- Product Summary
- Consists cooling plate and temperature control unit,the cooling plate is idesl for incorporation,such as analycal instruments.Peltier control power supply sdopts dropper type with less noise.
- Use
- For spectroscopic analysis
specification
-
Model
C11
-
Cooling plate
W88*D88*H10
-
cooling method
Air-cooled
-
Operating temperature limit
0～70℃
-
Control accuracy
±0.2℃
-
air conditioner
Digital setting Digital Display resolution 0.1 ° C.
-
External dimensions
W280*D430*H235
-
weight
About 14kg
-
Power supply
AC100V 5A
Warm air drying unit
control temperature and fluid / heating device and cooling device temperature and fluid
- Product Summary
- Warm air is generated by interlocking with the device
- Use
- Wafer drying
specification
-
Model
M49
-
fluid
Dry air
-
Flow rate
5～20L/min
-
Heating temperature
50℃
-
Power capacity
AC100V 10A
-
Housing
SUS304 hairline
5CH heater temperature controller
control temperature and fluid / heating device and cooling device temperature and fluid
- Product Summary
- This unit consists of temperature controller, SSR, breaker, sensor input, heater output, each channel can be independently set and independently controlled.
- Use
- Temperature control of the mantle heater
specification
-
Model
M19
-
Temperature controller
PID digital controllers
-
SSR
20A
-
NFB
15A
-
Power supply
AC100V / AC200V select either
-
There sensor disconnection function
-
Heater power lamp
-
Alarm lamp
PFA Flange heater
control temperature and fluid / heating device and cooling device
- Product Summary
- Heater part is coated with PFA, it is excellent in chemical resistance. Chemical solution can be heated directly, heat transfer efficiency is high. Because of the flange type, you can change the heater without removing the liquid inside the heating layer.
- Use
- Slurry supply device
specification
-
Model
C25
-
Rated
3-phase 200V 2kW
-
Withstand voltage
AC1500V1 minutes
-
Insulation resistance
resistance 10MΩ or more at DC500V Megger (cold)
-
Current error
10% ± less than the rated
-
pressure
0.5MPa below
-
Apply О ring
G85EPDM
(External site IPROS)
Dry solvent supplying unit C27A
control temperature and fluid / heating device and cooling device
- Product Summary
- It is a unit for stably supplying dry sorbent HS at constant pressure and constant temperature for recycling.
- Use
- Characteristic test of sample
specification
-
Model
C27A
-
Discharge pressure
1.0 MPa max
-
Discharge flow rate
4L/min max(1LINES)×8LINES
-
Refrigeration capacity
2.84kw (2442kcal/h)
-
Control temparature
20±2℃
-
Power supply
3 phase 200V 10KVA 30A